Kegco 24" Wide Homebrew Single Tap All Stainless Steel Commercial Kegerator with Keg - HBK1XS-1K
Dispense like the pros at home with the Kegco HBK1XS-1 Home Brew Kegerator! This keg beer cooler is sturdily built, so it can stand up to the demands of commercial environments like a restaurant or tasting room, but it is small enough to easily move it around your home. It is ETL and ETL Sanitation Listed and NSF Compliant, ensuring that it has met the requirements of widely accepted product safety standards for draft beer dispensers. This kegerator has everything you need to dispense your own home brew recipes, including the keg! The pre-configured kit features upgrades like the aluminum 5 lb. CO2 tank with corrosion-resistant red finish, a Commercial Grade Double Guage Regulator and a polished stainless steel draft tower at no additional cost - a $25 value - and comes with a brand new, 304 grade stainless steel ball lock keg with a rubber carrying handle.
4" locking casters make this beer dispenser easy to move, while the built-in drip tray and steel interior make it easy to clean. A 1/7 hp compressor provides cooling and cool air is fan-forced into the tower to ensure your beer is cold all the way up to the faucet. It comes with an air-cooled 3" diameter draft tower, so if your direct draw will be provided by your beer distributor, you're all set. Beverage Factory offers the ability to add a custom draft system with our top quality selection of regulators, couplers and fittings. See the available options below and feel free to contact our expert staff with any questions you may have.
Highlights:
- This beer dispenser includes everything you need to dispense home brewed beer, including a brand new 5 gallon ball lock keg
- Stainless steel construction, shock reducing rubber floor mat, foamed-in-place polyurethane insulation and a stainless steel top
- Fan-Forced Cooling provides rapid cool down and a blower hose directs cool air into the tower to keep the beer line cold all the way up to the faucet
- Stainless Steel top features guard rails to prevent glasses from sliding off and a built-in drip tray that channels any runoff to an internal drain receptacle
- ETL and ETL Sanitation Listed and NSF Compliant for commercial use
Features:
-
Includes a brand new 5 lb. Aluminum CO2 Tank with Electric Red Epoxy Finish
This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. It features an eye-catching glossy powder coated epoxy finish in Electric Red that acts as an extra layer of protection against corrosion and wear. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. An average fill is good for 5-6 kegs depending upon your fill. -
Includes Commercial Grade Double Gauge CO2 Regulator
This regulator works with any CO2 tank with a CGA-320 valve. The top gauge measures PSI, indicating how much CO2 pressure is inside of the keg. The side gauge measures the remaining volume of CO2 in the tank, so you'll know when it's about time to get the tank filled. This regulator features a T-style adjustment valve that can be adjusted by hand, eliminating the need for a screwdriver. -
Includes 5 feet of 5/16 Inch I.D. Blue Air Line Assembly with 2 Worm Drive Clamps
This 5 foot length of 5/16" I.D. Blue Air/CO2 Tubing is made of Thermoplastic Vinyl Hose (Super Vinyl). It will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. This air line assembly comes with two durable stainless steel worm drive clamps that can be easily installed or removed with a flat head screwdriver. -
Includes Ball Lock Home Brew Keg Tap Complete Set
This complete ball lock home brew keg tap set includes both a gas in and beer out coupler for easy tapping of ball lock Cornelius Pepsi kegs. The gas in has a 1/4" nut and 5/16" hose barb already attached for easy connection to the air line. The beer out connector has a 3/16" hose barb that connects to the 3/16" beer line. -
Includes a 3" Diameter Polished Stainless Steel Draft Tower
This NSF-approved tower is a 3" diameter single faucet metal draft tower made of polished stainless steel. It comes complete with a stainless steel faucet and 5 feet of 3/16 inch I.D. clear beer tubing. This tower is mounted using the gasket and four screws that are included. -
Includes Brand New 5 Gallon Ball Lock Home Brew Keg
Made of durable and sanitary 304 grade stainless steel, this Cornelius Pepsi keg has a permanently molded rubber bottom skirt and handles for easy carrying. The ball lock fittings can be easily accessed for cleaning and maintenance, and the stainless steel lid fastens tightly to the body and includes a pressure release valve. -
All dispensing accessories are UL recognized components - Continuous Cold Air Channeled Through Tower to Ensure Cold Product
- Heavy-Duty Stainless Steel Top
- Built-In Drip Tray with Drain
- Stainless Steel Interior Walls and Ceiling
- Shock Reducing Rubber Floor Mat
- Magnetic Gasket Provides Positive Door Sealing
- Self-Closing Door with Lock
- Refrigeration System Utilizes Ozone Friendly R134a Refrigerant
- CFC-Free Foamed-in-Placed Polyurethane Insulation
- Knockout for Remote CO2 or Nitrogen Tank
- Stainless Steel Finish
- ETL and ETL Sanitation Listed for Commercial Use
- Maximum Ambient Temperature: 90 degrees Fahrenheit
- Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
Specifications:
| Dimensions | |
| Height | 40" |
| Width | 23.5" |
| Depth | 31" |
| Weight | |
| Unit Weight | 143 lbs |
| Shipping Weight | 187 lbs |
| Warranty | |
| Labor | 1 Year |
| Parts | 1 Year |
| Compressor (Parts Only) | 5 Years |
| Key Features | |
| Built-in Capable | No |
| Security Lock | Yes |
| Keg Coupler | Yes |
| Regulator | Yes |
| CO2 Tank | Yes |
| Cleaning Kit | No |
| Outdoor Use | No |
| Commercial Use | Yes |
| Keg Storage Capacities | |
| Full Size / 1/2-Barrel | Holds 1 |
| Pony Size / 1/4-Barrel | Holds 1 |
| 1/4-Barrel Slim | Holds 2 |
| 1/6-Barrel | Holds 3 |
| 5 gal. Ball/Pin Lock Keg | Holds 3 |
| Exterior | |
| Cabinet | Stainless Steel |
| Drip Tray | Yes |
| Guard Rail | Yes |
| Casters | Yes |
| Draft Beer Tower | |
| Number of Faucets | 1 |
| Material | Chrome |
| Diameter | 3" |
| Door | |
| Color / Material | Stainless Steel |
| Number of Doors | 11 |
| Door Handle | Recessed |
| Field Reversible | No |
| Accepts Custom Overlay Panel | No |
| Cooling System | |
| Type | Compressor |
| Defrost System | Automatic |
| Front Ventilation | No |
| Controls | |
| Adjustable Thermostat | Yes |
| Digital | Yes |
| Electrical | |
| Electrical Requirements | 115V / 60HZ |
| Running Amps | 1.8A |
User Manual
Shipping and Returns
Order Confirmation:
Once your order is placed with us you will receive a notification and confirmation email with all your order details. If you receive your confirmation email that means our system has properly processed your purchase and has pre-authorized your credit card. We will then submit your order to our transit team to reach out to our supplier and/or warehouse manager to ensure that your item is still in stock for immediate packaging and shipping. If for some reason your item happens to be out of stock or on backorder, we will void the pre-authorization and reach out to you via e-mail. If the item(s) for your order become available for shipping within 9 days, we will process the charges and submit the order for shipment.
Shipment process:
Upon receiving your order we will vary the stock level of your item and proceed with processing your card within 7 days from the date of your order. Once the tracking numbers are available we will issue those to you via email to the email you provided at the time of your purchase. If for some reason you do not receive the tracking information from our team within 8 days of your order, do not hesitate to reach out to us at info@winebeercoolerdirect.com
Freight Shipping:
This is our most basic level of delivery service. No bells and whistles, just the essentials. All freight shipments will be scheduled between the delivery company and customer prior to delivery usually 1-2 days before the shipment is ready for delivery. Freight shipments require signature on delivery. This service includes:
Damages:
Please inspect the packaging of your item(s) when they arrive, if you notice any damage you should make note of it when signing for delivery. If your item(s) do arrived damaged, please send photos to info@winebeercoolerdirect.com and we will process an insurance claim on your behalf.
Returns:
Please check our Returns page for details on individual suppliers return policies
All products are rigidly checked and examined by our warehouse personnel at the time of shipment. Any damage must be reported to the freight carrier upon delivery and must be noted on the Bill of Lading (BOL) at the time of delivery. (Indicate model #, serial # and damage details on BOL ) All damage claims are to be filed with the carrier and we request that you notify us immediately. Any merchandise purchased, which you want returned, must have prior authorization, be sent back prepaid (customer pays freight), and have a 25% restocking charge applied. Any return items without an authorization number will be refused. All returned product must be in factory sealed cartons and in like condition to when it was sent out. Any return items without an authorization number will be refused or not issued credit.Dispense like the pros at home with the Kegco HBK1XS-1 Home Brew Kegerator! This keg beer cooler is sturdily built, so it can stand up to the demands of commercial environments like a restaurant or tasting room, but it is small enough to easily move it around your home. It is ETL and ETL Sanitation Listed and NSF Compliant, ensuring that it has met the requirements of widely accepted product safety standards for draft beer dispensers. This kegerator has everything you need to dispense your own home brew recipes, including the keg! The pre-configured kit features upgrades like the aluminum 5 lb. CO2 tank with corrosion-resistant red finish, a Commercial Grade Double Guage Regulator and a polished stainless steel draft tower at no additional cost - a $25 value - and comes with a brand new, 304 grade stainless steel ball lock keg with a rubber carrying handle.
4" locking casters make this beer dispenser easy to move, while the built-in drip tray and steel interior make it easy to clean. A 1/7 hp compressor provides cooling and cool air is fan-forced into the tower to ensure your beer is cold all the way up to the faucet. It comes with an air-cooled 3" diameter draft tower, so if your direct draw will be provided by your beer distributor, you're all set. Beverage Factory offers the ability to add a custom draft system with our top quality selection of regulators, couplers and fittings. See the available options below and feel free to contact our expert staff with any questions you may have.
Highlights:
- This beer dispenser includes everything you need to dispense home brewed beer, including a brand new 5 gallon ball lock keg
- Stainless steel construction, shock reducing rubber floor mat, foamed-in-place polyurethane insulation and a stainless steel top
- Fan-Forced Cooling provides rapid cool down and a blower hose directs cool air into the tower to keep the beer line cold all the way up to the faucet
- Stainless Steel top features guard rails to prevent glasses from sliding off and a built-in drip tray that channels any runoff to an internal drain receptacle
- ETL and ETL Sanitation Listed and NSF Compliant for commercial use
Features:
-
Includes a brand new 5 lb. Aluminum CO2 Tank with Electric Red Epoxy Finish
This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. It features an eye-catching glossy powder coated epoxy finish in Electric Red that acts as an extra layer of protection against corrosion and wear. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. An average fill is good for 5-6 kegs depending upon your fill. -
Includes Commercial Grade Double Gauge CO2 Regulator
This regulator works with any CO2 tank with a CGA-320 valve. The top gauge measures PSI, indicating how much CO2 pressure is inside of the keg. The side gauge measures the remaining volume of CO2 in the tank, so you'll know when it's about time to get the tank filled. This regulator features a T-style adjustment valve that can be adjusted by hand, eliminating the need for a screwdriver. -
Includes 5 feet of 5/16 Inch I.D. Blue Air Line Assembly with 2 Worm Drive Clamps
This 5 foot length of 5/16" I.D. Blue Air/CO2 Tubing is made of Thermoplastic Vinyl Hose (Super Vinyl). It will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. This air line assembly comes with two durable stainless steel worm drive clamps that can be easily installed or removed with a flat head screwdriver. -
Includes Ball Lock Home Brew Keg Tap Complete Set
This complete ball lock home brew keg tap set includes both a gas in and beer out coupler for easy tapping of ball lock Cornelius Pepsi kegs. The gas in has a 1/4" nut and 5/16" hose barb already attached for easy connection to the air line. The beer out connector has a 3/16" hose barb that connects to the 3/16" beer line. -
Includes a 3" Diameter Polished Stainless Steel Draft Tower
This NSF-approved tower is a 3" diameter single faucet metal draft tower made of polished stainless steel. It comes complete with a stainless steel faucet and 5 feet of 3/16 inch I.D. clear beer tubing. This tower is mounted using the gasket and four screws that are included. -
Includes Brand New 5 Gallon Ball Lock Home Brew Keg
Made of durable and sanitary 304 grade stainless steel, this Cornelius Pepsi keg has a permanently molded rubber bottom skirt and handles for easy carrying. The ball lock fittings can be easily accessed for cleaning and maintenance, and the stainless steel lid fastens tightly to the body and includes a pressure release valve. -
All dispensing accessories are UL recognized components
- Continuous Cold Air Channeled Through Tower to Ensure Cold Product
- Heavy-Duty Stainless Steel Top
- Built-In Drip Tray with Drain
- Stainless Steel Interior Walls and Ceiling
- Shock Reducing Rubber Floor Mat
- Magnetic Gasket Provides Positive Door Sealing
- Self-Closing Door with Lock
- Refrigeration System Utilizes Ozone Friendly R134a Refrigerant
- CFC-Free Foamed-in-Placed Polyurethane Insulation
- Knockout for Remote CO2 or Nitrogen Tank
- Stainless Steel Finish
- ETL and ETL Sanitation Listed for Commercial Use
- Maximum Ambient Temperature: 90 degrees Fahrenheit
- Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
Specifications:
| Dimensions | |
| Height | 40" |
| Width | 23.5" |
| Depth | 31" |
| Weight | |
| Unit Weight | 143 lbs |
| Shipping Weight | 187 lbs |
| Warranty | |
| Labor | 1 Year |
| Parts | 1 Year |
| Compressor (Parts Only) | 5 Years |
| Key Features | |
| Built-in Capable | No |
| Security Lock | Yes |
| Keg Coupler | Yes |
| Regulator | Yes |
| CO2 Tank | Yes |
| Cleaning Kit | No |
| Outdoor Use | No |
| Commercial Use | Yes |
| Keg Storage Capacities | |
| Full Size / 1/2-Barrel | Holds 1 |
| Pony Size / 1/4-Barrel | Holds 1 |
| 1/4-Barrel Slim | Holds 2 |
| 1/6-Barrel | Holds 3 |
| 5 gal. Ball/Pin Lock Keg | Holds 3 |
| Exterior | |
| Cabinet | Stainless Steel |
| Drip Tray | Yes |
| Guard Rail | Yes |
| Casters | Yes |
| Draft Beer Tower | |
| Number of Faucets | 1 |
| Material | Chrome |
| Diameter | 3" |
| Door | |
| Color / Material | Stainless Steel |
| Number of Doors | 11 |
| Door Handle | Recessed |
| Field Reversible | No |
| Accepts Custom Overlay Panel | No |
| Cooling System | |
| Type | Compressor |
| Defrost System | Automatic |
| Front Ventilation | No |
| Controls | |
| Adjustable Thermostat | Yes |
| Digital | Yes |
| Electrical | |
| Electrical Requirements | 115V / 60HZ |
| Running Amps | 1.8A |
User Manual
Shipping and Returns
Order Confirmation:
Once your order is placed with us you will receive a notification and confirmation email with all your order details. If you receive your confirmation email that means our system has properly processed your purchase and has pre-authorized your credit card. We will then submit your order to our transit team to reach out to our supplier and/or warehouse manager to ensure that your item is still in stock for immediate packaging and shipping. If for some reason your item happens to be out of stock or on backorder, we will void the pre-authorization and reach out to you via e-mail. If the item(s) for your order become available for shipping within 9 days, we will process the charges and submit the order for shipment.
Shipment process:
Upon receiving your order we will vary the stock level of your item and proceed with processing your card within 7 days from the date of your order. Once the tracking numbers are available we will issue those to you via email to the email you provided at the time of your purchase. If for some reason you do not receive the tracking information from our team within 8 days of your order, do not hesitate to reach out to us at info@winebeercoolerdirect.com
Freight Shipping:
This is our most basic level of delivery service. No bells and whistles, just the essentials. All freight shipments will be scheduled between the delivery company and customer prior to delivery usually 1-2 days before the shipment is ready for delivery. Freight shipments require signature on delivery. This service includes:
Damages:
Please inspect the packaging of your item(s) when they arrive, if you notice any damage you should make note of it when signing for delivery. If your item(s) do arrived damaged, please send photos to info@winebeercoolerdirect.com and we will process an insurance claim on your behalf.
Returns:
Please check our Returns page for details on individual suppliers return policies
All products are rigidly checked and examined by our warehouse personnel at the time of shipment. Any damage must be reported to the freight carrier upon delivery and must be noted on the Bill of Lading (BOL) at the time of delivery. (Indicate model #, serial # and damage details on BOL ) All damage claims are to be filed with the carrier and we request that you notify us immediately. Any merchandise purchased, which you want returned, must have prior authorization, be sent back prepaid (customer pays freight), and have a 25% restocking charge applied. Any return items without an authorization number will be refused. All returned product must be in factory sealed cartons and in like condition to when it was sent out. Any return items without an authorization number will be refused or not issued credit.