Skip to content
No Sales Tax and Free Shipping - Live Assistance Available - Save Today
No Sales Tax and Free Shipping - Live Assistance Available - Save Today
SKU ICXCK-1B-3

Kegco 24" Wide Cold Brew Coffee Triple Tap Black Commercial Kegerator - ICXCK-1B-3

by Kegco
Original price $2,624.00 - Original price $2,624.00
Original price
$2,624.00
$2,624.00 - $2,624.00
Current price $2,624.00

Fast and FREE Shipping

FREE curbside delivery

Limited Stock On Hand.

Lowest Price Guaranteed. We Price Match.

Many Suppliers increasing prices 10%+ soon - Beat the Price Increases and Buy Today

CALL US TODAY FOR THE BEST PRICE: 1-727-266-2332

No Additional Fee's Added At Checkout. The price you see is the price you pay. We have private relationships with all of our manufacturers which allows us bottom line pricing backed by our 100% Best Price Guarantee. If you find it somewhere else for cheaper. We will match the price. No Questions Asked.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

This Kegco ICXCK-1B-3 Triple Faucet Commercial Javarator is perfect for restaurants and coffee shops that want to start offering a variety of cold-brewed coffees on tap. The interior is large enough to hold up to four 5 gallon kegs, allowing you to dispense up to three kegs of iced coffee at a time while keeping another keg frosty cold and ready to go. This coffee keg dispenser features a knockout that allows you to place your nitrogen tank outside of the unit, leaving you more room inside for kegs.

4" locking casters make this cold-brew coffee dispenser easy to move, while the built-in drip tray and steel interior make it easy to clean. A 1/7 hp compressor provides cooling and cool air is fan-forced into the tower to ensure your iced coffee stays cold all the way up to the faucet.

Highlights:

  • Designed for the unique requirements of dispensing iced coffee on tap from up to three coffee kegs at the same time
  • Three tap dispense system consists of stainless steel and food grade plastic to ensure cleanliness
  • Rugged steel construction with stainless steel top and built-in drip tray that collects spills
  • Spacious interior can accommodate up to four 5 gallon kegs with external nitrogen tank
  • ETL and ETL Sanitation Listed and NSF Compliant for commercial use

Features:

    • Includes a brand new aluminum 15 cu. ft. Nitrogen Tank with Sleek Black Epoxy Finish
      This tank is produced from high strength, corrosion-resistant aluminum alloy 6061-T6. The eye-catching sleek black epoxy finish acts as an extra layer of protection against corrosion and wear, and the aluminum construction is lighter weight than steel tanks and does not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 580 Valves are CGA approved, and have a female thread for Nitrogen Regulators. (5.5" diameter, 18.25" Height).
    • Includes a Commercial Grade Dual Gauge Nitrogen Regulator with 3-Way Air Distributor
      This commercial grade dual gauge regulator is compatible with nitrogen cylinders with CGA 580 valves and features a double gauge design that measures both PSI and the volume of nitrogen gas in the tank. The durable regulator body is constructed of forged brass with all brass connections and components. This regulator features an integral safety pressure relief valve that releases at 45 PSI and comes with a 3-way air distributor.
    • Includes three 5 foot lengths of 5/16" I.D. Air Line Assembly with 2 Snap Clamps each
      Three standard 5 foot lengths of 5/16" I.D. Blue Air/Nitrogen tubing made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. Each air line assembly comes with two plastic snap clamps with a reusable clamp design.
    • Includes three sets of Ball Lock Home Brew Keg Couplers
      Each set includes both a gas in and a beer out coupler that works with ball lock Cornelius Pepsi kegs. The gas in features a 1/4" thread for a flare fitting. This connector already has attached the special 1/4" nut that has a 5/16" hose barb attached. The couplers are made of food grade plastic which will not corrode. There is an option to upgrade to all stainless steel ball lock couplers.
    • Includes a 3" Diameter Triple Faucet Stainless Steel Draft Tower
      The tower is a commercial grade single column, triple faucet, 3" diameter stainless steel draft tower with 100% stainless steel contact. The stainless steel contact is necessary for good sanitation. This tower comes complete with stainless steel faucets and three 5 foot lengths of 3/16" I.D. clear tubing. This tower is mounted using the gasket and four screws that are included. The faucets can be upgraded to Perlick faucets, which have less internal surface area to prevent the faucet knobs from sticking.
    • Keg Storage Capacities:
      • One (1) Full Size / 1/2-Barrel (15.5 Gal.)
      • One (1) Pony Size / 1/4-Barrel Short (7.75 Gal.)
      • Two (2) 1/4-Barrel Slim (7.75 Gal.) or
      • Four (4) 1/6-Barrel (5.23 Gal.)
    • Maximum Ambient Temperature: 90 degrees Fahrenheit
    • Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
    • Continuous cold air channeled through tower to ensure cold product
    • Heavy-duty stainless steel top
    • Built-in drip tray with drain
    • Stainless steel interior walls and ceiling
    • Rubber Floor Mat prevents damage to interior
    • Magnetic gasket provides positive door sealing
    • Self-closing door with lock
    • Refrigeration system utilizes ozone friendly R134a refrigerant
CFC-free foamed-in-place polyurethane insulation
  • Knockout for remote nitrogen tank
  • Black finish
  • ETL and ETL Sanitation Listed for Commercial Use
  • Specifications:

    Dimensions
    Height 40" (top of guard rail)
    Width 23.5"
    Depth 31"
    Warranty
    Labor 1 Year
    Parts 1 Year
    Compressor (Parts Only) 5 Years
    Key Features
    Built-in Capable No
    Security Lock Yes
    Keg Coupler Ball Lock
    Regulator Dual Gauge
    CO2 Tank 5 lb.
    Cleaning Kit Not Included
    Outdoor Use No
    Commercial Use Yes
    Keg Storage Capacities
    Full Size / 1/2-Barrel 1
    Pony Size / 1/4-Barrel 1
    1/4-Barrel Slim 2
    1/6-Barrel 3 (4 with external nitrogen tank)
    5 gal. Ball/Pin Lock Keg 3 (4 with external nitrogen tank)
    Exterior
    Cabinet Black
    Drip Tray Yes
    Guard Rail Yes
    Casters Yes
    Draft Beer Tower
    Number of Faucets 3
    Material Stainless Steel
    Diameter 3"
    Door
    Color / Material Black
    Number of Doors 1
    Door Handle Recessed
    Field Reversible No
    Accepts Custom Overlay Panel No
    Cooling System
    Type Compressor
    Defrost System Automatic
    Front Ventilation No
    Controls
    Adjustable Thermostat Yes
    Digital No
    Electrical
    Electrical Requirements 115 V / 60 Hz
    Running Amps 1.8 A


    User Manual

    QUESTIONS & ANSWERS

    Have a Question?

    Be the first to ask a question about this.

    Ask a Question

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Testimonials

    Loving my new induction cooktop! Super easy to clean and use and heats up fast. I feel better having my young kids in the kitchen since there's no open flames to mess with.

    Jason B

    Glad I found you guys, the price was a lot better than the stores by my house in Arizona, and everything was easy. Thanks again.

    Joe R.

    Really impressed with the level of knowledge Jim had when I called. I called 4 other websites and no one had any idea how to help, or they didn't even pick up the phone. On the first ring, Yani picked up the phone and got me sorted out. Amazing customer service

    Narae Y.

    NEW CUSTOMER DISCOUNT